Interior Design
Full-service decorating that blends high and low, vintage finds with modern pieces for spaces that feel personal and collected.
Learn More
DIY Projects
Step-by-step tutorials for refinishing furniture, sewing pillows, styling bookshelves, and transforming rooms on a budget.
Learn More
E-Decorating
Personalized design guidance delivered online — perfect for clients anywhere in the world who want a professional eye.
Learn More
Portfolio
Browse completed room makeovers, before-and-after transformations, and styling projects from Bay Area homes.
Learn More
Blog
Interior design inspiration, fashion finds, entertaining ideas, and peeks into real home renovations and styling projects.
Learn More
Downloads
Free curated resources for home decorating and design — guides, checklists, and inspiration to help you get started.
Learn MoreHow to Add Crown Moulding to a Room Without Professional Help
Crown moulding, often called cornice in Australia, can make a plain room feel considered and complete. It softens the junction between wall and ceiling, adds architectural interest and gives paint colours a more finished frame. The effect can be traditional, relaxed, coastal or thoroughly modern, depending on the profile you choose.
You do not need a heritage house or an enormous renovation budget to use it well. A modest trim in a bedroom, hallway or dining area can create definition where furniture and artwork alone feel slightly lost. The key is to treat the moulding as part of the room’s overall composition rather than an isolated decorative strip.
For Australian homes, the method depends on the surface and material. Many newer houses have plasterboard walls and ceilings, while older properties may have uneven plaster, brickwork or layers of previous paint. Humidity, seasonal movement and the occasional wonky corner are practical realities, so careful measuring and flexible adhesive matter more than rushing through the installation.
This project is approachable for a confident DIY decorator with basic tools, patience and a second pair of hands. You will need to plan the corners, make clean cuts, secure the trim properly and spend time filling and painting. That preparation is what separates elegant architectural detail from a line of visible gaps.
Choose The Right Profile And Material
Begin by looking at the room’s proportions. A small bedroom with a low ceiling usually suits a narrower, simpler profile, while a generous living room can carry deeper stepped, coved or ogee moulding. If the trim is too tall in a compact space, the ceiling may feel lower. If it is too slight in a large room, it can disappear once painted.
Consider the existing character of the property as well. Federation, Victorian and Art Deco homes can accommodate more decorative cornice, although a restrained profile often looks fresher than trying to recreate every original detail. In a contemporary Brisbane apartment or a renovated Melbourne terrace, a crisp square-set-inspired trim may provide enough contrast without making the room feel themed.
Timber, MDF, polystyrene, polyurethane and plaster-based products are widely available. Lightweight polyurethane and polystyrene are comparatively easy to handle and can be cut with ordinary hand tools, making them useful for a first project. MDF has a smooth surface and a substantial appearance but needs careful sealing, particularly in areas exposed to moisture. Traditional plaster cornice can look beautiful, yet it is heavy and more demanding to install.
Before buying, check the length of each piece and calculate the total linear metres around the room. Add at least 10 per cent for offcuts, imperfect cuts and mistakes. A Bunnings visit may supply the trim, adhesive, gap filler and paint in one trip, but take a sample home first. Hold it against the wall in daylight and under your evening lights before committing to several lengths.
Prepare The Room And Mark A Level Line
Remove artwork, curtains and furniture from the wall edges, then cover the floor with a drop sheet. Crown moulding is much easier to install when you can position a ladder freely. Clean dust and grease from the top section of the wall, and scrape away loose paint. If the existing paint is glossy, lightly sand it so the adhesive has a sound surface.
Find the lowest point of the ceiling with a tape measure. Older Australian houses often have ceilings that are subtly uneven, so measuring down from the ceiling at every point can create a visibly wandering trim. Instead, use a spirit level or laser level to mark a consistent line around the room. Set the line according to the width of the moulding, leaving enough surface for the trim to sit firmly on both wall and ceiling.
Mark studs, noggins or other solid fixing points where possible. A stud finder can help on plasterboard, although electrical wiring and plumbing may complicate the reading. Do not drill or nail blindly near switches, outlets or plumbing fixtures. Lightweight trim can often be held with construction adhesive and a few finishing nails, while heavier pieces require reliable mechanical support.
If your home was built before the 1990s and you suspect old lead paint or asbestos-containing materials, stop and arrange appropriate testing before sanding or cutting. Asbestos can occur in older building products, and disturbing it is not a casual DIY task. Wear safety glasses, a dust mask suited to the material and hearing protection when using power tools.
Measure And Cut The Corners Carefully
Most of the work is in the corners. Inside corners can be dealt with by coping one piece so it follows the profile of the adjoining piece, or by cutting both pieces to matching angles. Coping is often more forgiving when walls are uneven, because the front profile can meet tightly even if the back edges are imperfect. For a simple room with square corners, mitre cuts may be quicker.
Do not assume every corner is 90 degrees. Use an angle finder, or make a test template from scrap trim. Cut the template first, place it in the corner and adjust until the fit is close. This small step can save an expensive length of moulding. For an outside corner, mark the visible face carefully and remember that the direction of the cut reverses from one end to the other.
A mitre saw makes repeated cuts easier, but a mitre box and fine-toothed handsaw can work for lightweight materials. Keep the trim stable, support both ends and cut with the finished face oriented correctly. Label each piece on the back with its wall position before taking it down. “Living room window wall” is much more useful than trying to remember which nearly identical length belongs where.
Plan joins on the longest walls away from the most visible sightlines. If a seam must occur, cut both joining ends with matching opposing mitres rather than making a straight butt joint. A little extra length is helpful, but forcing a piece into place can bow the trim and pull the corners apart. Dry-fit every section before applying adhesive, especially around door openings, built-in shelving and ceiling fixtures.
Install The Trim In Manageable Sections
Start with the longest, least complicated wall. Apply a continuous but controlled bead of compatible construction adhesive to the back of the moulding, keeping it away from the edges so excess does not spread across the painted surfaces. Press the piece into the marked line and hold it in place. Follow the product instructions for open time and curing; some adhesives grip immediately, while others need temporary support.
Use finishing nails or brads where the material and wall allow it. Sink the heads slightly so they can be filled later. On plasterboard, nails alone may not hold a substantial profile securely, and adhesive alone may struggle while curing. For heavy plaster or timber pieces, enlist another person to support the length and use fixings suited to the substrate. “No professional help” should not mean working unsafely from an unstable ladder or lifting long lengths overhead alone.
Work around the room in sections, checking alignment as you go. Keep a damp cloth nearby for fresh adhesive, but avoid smearing it across the wall. At internal corners, one piece should meet the profile of the other rather than leaving a hollow triangular gap. At external corners, protect the fragile edge while positioning the trim and avoid repeatedly pulling it away once adhesive has made contact.
A room can look worse before it looks better because raw joins, nail holes and slight gaps remain visible. That is normal. Allow the adhesive to cure for the specified time before filling or sanding. If one section has shifted, correct it while the adhesive is workable rather than hoping paint will disguise the problem.
Fill, Paint And Connect It To The Room
Use lightweight spackling compound or suitable gap filler for nail holes and small imperfections. Flexible paintable caulk is better for the line where the moulding meets the wall or ceiling, since those surfaces may move slightly over time. Apply a narrow bead, smooth it with a damp finger or tool and remove excess immediately. Large gaps may need backing material or a second application rather than a thick layer of caulk.
Sand filled areas lightly once dry, then spot-prime exposed MDF, timber or porous filler. A quality primer prevents uneven sheen and helps the topcoat cover consistently. Paint the trim in the same colour as the ceiling for a quiet, spacious effect, or match it to the wall for a more enveloping room. A contrasting white can sharpen the architecture, though stark white against a warm wall colour may feel harsher than expected.
The finish should support the furnishings. In a layered, collected scheme, simple cornice can give vintage furniture, modern lighting and budget-friendly pieces a visual boundary. If you are preparing a property for sale, keep the profile restrained and the paintwork immaculate; practical staging a room principles generally favour details that make rooms feel maintained rather than highly personalised.
Use the same trim thoughtfully through connected spaces. Stopping crown moulding abruptly at one doorway can look accidental, while carrying it through a hallway may create a stronger rhythm. It does not have to appear in every room, however. A decorative treatment in the dining room or main bedroom can be enough to establish character without turning the entire home into a display of architectural trim.
A successful DIY installation is judged from normal standing height, not with your nose pressed against every seam. Step back after painting, view the room from the doorway and switch on the lights you use most often. Small irregularities tend to disappear into the overall design, while poor proportion, a crooked line or an unpainted gap will remain noticeable.
Crown moulding is a relatively small alteration with a substantial visual payoff, especially when it is scaled to the room and installed with restraint. Take your time with templates, buy extra material, protect the surfaces and treat finishing as part of the project rather than an afterthought. For a first attempt, choose one straightforward room with four accessible walls and avoid combining the job with ceiling repairs or complex cabinetry.
Begin by measuring the room’s perimeter and one sample corner, then use those measurements to choose a profile and calculate the amount of trim you need.




Recent Projects