Interior Design
Full-service decorating that blends high and low, vintage finds with modern pieces for spaces that feel personal and collected.
Learn More
DIY Projects
Step-by-step tutorials for refinishing furniture, sewing pillows, styling bookshelves, and transforming rooms on a budget.
Learn More
E-Decorating
Personalized design guidance delivered online — perfect for clients anywhere in the world who want a professional eye.
Learn More
Portfolio
Browse completed room makeovers, before-and-after transformations, and styling projects from Bay Area homes.
Learn More
Blog
Interior design inspiration, fashion finds, entertaining ideas, and peeks into real home renovations and styling projects.
Learn More
Downloads
Free curated resources for home decorating and design — guides, checklists, and inspiration to help you get started.
Learn MoreHow to Paint a Brick Fireplace White Without Chalking or Peeling
A white brick fireplace can brighten a dark living room, soften a dated surround and give a home the relaxed, layered character that suits both modern and vintage interiors. The finish looks simple, but a lasting result depends on preparation more than the colour itself. Brick is porous, mortar can shed dust, and an active fireplace creates heat that ordinary wall paint may not tolerate.
The most common failures are chalking, flaking and patchy coverage. Chalking usually means the surface is releasing powder, the coating has broken down in heat or the wrong product was used. Peeling often points to trapped moisture, soot, efflorescence or paint applied over a glossy, dirty surface. White paint makes each problem more visible, so careful cleaning and drying are essential.
Australian homes add a few practical considerations. A fireplace in a cool Melbourne terrace may have decades of soot and old coatings, while a coastal Sydney or Brisbane home may face salt air and higher humidity. Solid-fuel heaters also need to comply with relevant installation and clearance requirements, so cosmetic work should never reduce ventilation or cover safety information. With the right process, the brick surround can look crisp while remaining durable and safe.
Decide Whether The Fireplace Can Be Painted
Start by identifying which parts are suitable for ordinary masonry paint. The outer brick surround, mantel, hearth surround and non-heated decorative areas can usually be painted when they are sound and dry. The inside of the firebox should not be coated with standard interior or exterior paint. Direct flame, embers and intense radiant heat can cause blistering, smoke and unpleasant fumes.
If the fireplace is functional, determine whether it is a gas, wood-burning or electric unit. Gas and wood heaters require particular care around vents, flues, clearances and combustible materials. In Australia, solid-fuel heater installations are commonly assessed against AS/NZS 2918, along with state or territory requirements and local council rules. Painting should not cover a manufacturer’s label, obstruct an air intake or alter the clearance around a heater.
Check the brickwork before planning the colour. Crumbling mortar, loose bricks, active damp, rust stains or a flue that needs attention should be addressed first. A heritage-listed property may also have restrictions on altering original masonry. In older Sydney, Adelaide and Melbourne homes, a building professional may be needed before covering exposed brick or changing a historically significant fireplace.
Test For Moisture, Soot And Loose Material
A successful white fireplace makeover begins with a dry, stable surface. Press a clean white cloth firmly against several bricks and mortar joints. If it picks up a fine orange, grey or white powder, the surface needs further investigation. White deposits may be efflorescence, which occurs when moisture carries salts through masonry. Painting over it can trap the problem and lead to bubbling or peeling.
Look for dark soot, greasy marks, water stains and areas where previous paint is lifting. A moisture meter can help, although it is not a substitute for finding the source of damp. Possible causes include a leaking chimney cap, failed flashing, condensation, rising damp or rain entering through damaged masonry. Coastal homes may also accumulate salt deposits, and humid Queensland conditions can slow drying and encourage mould in poorly ventilated rooms.
Scrape only the loose material with a stiff nylon or natural-bristle brush. Avoid aggressive wire brushing on soft, old brick because it can gouge the surface and expose more friable material. Vacuum the dust using a brush attachment, then inspect the joints again. If the brick continues to shed heavily, pause the decorating project and have the masonry assessed rather than sealing an unstable surface beneath paint.
Clean The Brick Without Saturating It
For general soot and household grime, use warm water with a small amount of sugar soap or a suitable masonry cleaner. Work in manageable sections with a firm brush, keeping the solution controlled rather than flooding the wall. Test in an inconspicuous area first, especially if the brick is old, handmade or previously painted.
Grease around a cooking or open fireplace may need a degreasing cleaner, but rinse away residue carefully. Cleaner left in the pores can interfere with adhesion and create a powdery finish. A light mist of clean water followed by a clean cloth or sponge is usually safer indoors than pressure washing, which can force water into mortar joints and surrounding plaster.
Mould should be treated with a product labelled for masonry and used according to its directions. Provide ventilation while cleaning, and wear eye protection, gloves and a suitable mask when disturbing soot or old coatings. Do not mix bleach with other cleaners. Once washing is complete, allow the fireplace to dry thoroughly—often several days in a cool room, longer in a damp coastal or tropical climate.
Prepare The Surface For Adhesion
When the brick is completely dry, remove any remaining loose paint, powder or crumbling mortar. A scraper can lift peeling edges, while a sanding block can soften sharp transitions between old paint and bare brick. Do not aim for a perfectly smooth surface; some natural texture is part of the appeal of a painted brick fireplace.
Repair shallow holes and damaged joints with a compatible masonry repair compound. Let repairs cure as directed, then brush away dust. If the mortar is severely deteriorated or bricks move under light pressure, repointing or structural work should come before decorating. Filling cracks with ordinary interior gap filler will rarely withstand the movement and temperature changes associated with a fireplace.
Mask the floor, walls, mantel and fittings with quality painter’s tape and drop sheets. Protect timber, stone and metal carefully, since masonry primers can be difficult to remove once dry. If the fireplace has a gas log set or electrical components, have them isolated or protected by a qualified person rather than wrapping and painting around them casually.
Choose A Paint System That Can Handle Masonry
Use a breathable masonry primer where the manufacturer recommends one, particularly over bare brick, patched areas or stains. A bonding or alkali-resistant primer can help create an even base, while a stain-blocking primer may be needed for persistent soot marks. Check that the product is intended for masonry and compatible with the chosen topcoat.
For the surround, a quality low-sheen acrylic masonry paint is generally more forgiving than a high-gloss finish. It allows some vapour movement and is easier to touch up. Choose a product rated for the temperatures expected on the specific surface, not simply one marketed as “heat resistant”. Heat-resistant stove paint is designed for particular metal components and may not be suitable for porous brick or a decorative mantel.
Australian hardware retailers carry many water-based masonry and interior products, but labels differ between ranges. Read the technical data sheet rather than relying on a generic claim. Confirm the maximum service temperature, suitable substrates, recoat time and whether the paint is intended for interior use. Low-VOC paint can be a sensible choice in a living area, although ventilation remains important while the coating cures.
Apply Thin Coats And Allow Proper Curing
Stir the primer and paint thoroughly, then apply a thin, even coat with a masonry roller. Use a brush to work paint into recessed joints and textured brick, but avoid filling every deep pore with heavy product. Excess paint can skin over on the surface while remaining soft underneath, increasing the chance of cracking or peeling.
Allow the primer to dry for the full time stated on the label, taking humidity and temperature into account. A Brisbane room on a wet summer day may require much longer than a dry Adelaide afternoon. Apply the first white topcoat thinly, followed by a second coat once the surface is properly dry. Several controlled coats are more durable than one thick coat intended to hide every variation.
Keep the fireplace unused until the coating has fully cured, not merely until it feels dry. Heat introduced too soon can soften the paint, create odours or cause premature blistering. The curing period varies by product, so follow the manufacturer’s instructions and keep the room ventilated without exposing the fresh finish to strong dust or rain.
Prevent Chalking And Peeling Over Time
A painted brick surround needs gentle maintenance. Dust it with a soft brush or vacuum attachment, then wipe marks with a lightly damp cloth. Avoid abrasive pads, strong solvents and repeated soaking. If the finish begins to release powder, investigate before applying another coat; simply painting over chalking usually creates another weak layer.
Watch for new moisture stains, hairline cracks, darkening around the firebox or lifting at repaired joints. These signs may indicate a flue, chimney or masonry issue rather than a paint problem. Keep combustible decorations, baskets and furniture within the required clearance from a working heater, particularly during the colder months when the fireplace is used frequently.
White is a flexible backdrop for an Australian home’s collected style. Pairing it with warm timber, aged brass, woven textures or a vintage mirror can keep the room from feeling stark. In a rental or a home where permanent changes are limited, confirm the owner’s approval before painting exposed brick, as removing the coating later can be difficult and costly.
A durable result comes from treating the fireplace as masonry and as a heat source, rather than as an ordinary plaster wall. Test the brick, solve damp and soot issues, use compatible primer and paint, and respect the curing period. Before buying supplies, switch off or arrange professional isolation of the fireplace and inspect the surround for moisture, loose material and heat exposure.




Recent Projects